Ensuring your pool water is filtered and balanced are some of the basic functions that must
be performed to create an enjoyable and safe swimming experience. Managing sanitizer,
filtration, pH balance and alkalinity can be quite challenging, and used to involve many trips
to the pool store. Let The Attendant paired with the Chemistry
Module take on these daunting chores for you.
The Attendant + Chemistry, with its Track and Record Feature, will automatically determine
how much filtration is necessary and time the work in the most energy efficient way. The Chemistry Module will leverage a pH and ORP probe to track and record the
amount of sanitizer and pH in your pool over time, and grant you the ability to monitor these
values yourself via the Poolside Attendant app. You can also grant access to your
maintenance company so that they too can have visibility.
If you also have a salt cell installed, this operating model allows you to leverage that and react
to the ORP (sanitization) levels as they change over time. For example, if the ORP level is low,
The Attendant will turn on the salt cell to begin generating chlorine. Conversely, if the level is
too high, it will turn it off.
For a more hands-off solution to your pool’s water balance, you can have the Chemistry
Module dispense chemicals to address any imbalances found via the auto-dosing Feature.
This feature allows you to programmatically react to the chemistry needs of your pool. To
facilitate this, you will need to incorporate additional hardware (sold separately), like chemical
tanks & pumps, UV water sanitizers, or ozone dispensers. You choose what method of
dispensing chemicals is right for you and your pool, and let The Attendant do the rest.
Featured Highlights:
- Ability to track and record the pool’s pH and ORP readings over time
- Ability to leverage our auto dosing feature to assist in keeping your pH and ORP levels
steady allowing you to programmatically react to the chemistry values of your pool
(Additional equipment needed)
- Ability to configure the system and manage the level of chemical controls that you
feel are appropriate for your pool
- Ability to grant access to your maintenance company so that they too can have
visibility
- Ability to start off with digital monitoring (track and record) of the water using pH &
ORP probes, and progress to auto dosing at later time should it benefit you
- Includes add-on Chemistry Board, two 25 ft BNC cables, along with one set of Calibration
Fluids.
Equipment Requirements:
- Track & Record Feature
- The Attendant (ATT-2, ATT-4, ATT-6, ATT-8)
- Chemistry Module (ATT-CHEM)
- Chemistry Probe Kits (ATT-CPK)
- Auto-dose Feature - The above mentioned equipment, plus a Chemical Tank and Pump of your choice.