This switching mechanism is most suited for controlling shared equipment

 

 Have you ever wanted an affordable control that would only automate a set of water valves from the pool position to the spa position? Or maybe just turn a single water valve to engage a water feature? Now you can have it all with Intermatic's P4243ME.

 

This Switching Mechanism is most suited for controlling the shared equipment of Pool-Spa combinations but it can be also used to control all the equipment typically needed in connection with water features, water gardening solar heating and other similar applications. It features two 3 HP double pole relays, one of which can be controlled by an external timer, 24 volt supply for up to three valve actuators, automatic HIGH/LOW water temperature selector and push button control for each load with indicator lights on the face of Control.

 

In addition, the unit has connections for a hard wired or a wireless remote and/or to a remote installed Master Switch.

 

The Mechanism is designed to “snap” into most Intermatic panels and outdoor enclosures in use today and it can be interfaced with other Intermatic products in order to facilitate a large number of custom applications. For example, if it is combined with Model P1353ME Multipurpose Control, the two Mechanisms together can handle a two speed filter pump, an interconnected cleaner pump, a two stage protected heater, together with “turn key” Pool-to-Spa operation, a jet pump and lights.

 

Specifications P4243ME
Input Voltages Display	24 VAC, 50/60 Hz
Heater Protection Switch	No
Motor	1 1/2 HP, 120 VAC, 50/60 Hz 3 HP, 240 VAC, 50/60 Hz
Resistive	17 A, 120/240 VAC, 50/60 Hz
Tungsten	10 A, 120 VAC, 50/60 Hz
Warranty	1-year

If within the warranty period specified, this product fails due to a defect in material or workmanship, Intermatic Incorporated will repair or replace it, at its sole option, free of charge. This warranty is extended to the original household purchaser only and is not transferable. This warranty does not apply to: (a) damage to units caused by accident, dropping or abuse in handling, acts of God or any negligent use; (b) units which have been subject to unauthorized repair, opened, taken apart or otherwise modified; (c) units not used in accordance with instructions; (d) damages exceeding the cost of the product; (e) sealed lamps and/or lamp bulbs, LED’s and batteries; (f) the finish on any portion of the product, such as surface and/or weathering, as this is considered normal wear and tear; (g) transit damage, initial installation costs, removal costs, or reinstallation costs.